中文
- 中文
- English
- français
- Deutsch
- русский
- italiano
- español
- português
- 日本語
- 한국의

200G QSFP56 SR4 100m 850nm PM4 Transceiver

Features

QSFP56 Serial Optical Interface

4x50G PAM4 retimed 200GAUI-4 C2M electrical interface

MPO-12 connector
4 channel VCSEL array and 4 channels PIN photodetector array >Maximum link length of 70m on OM3 or 100m on OM4

QSFP MSA Compliant

Hot Pluggable QSFP56 form factor
Compliant with SFF8636 Rev 2.10a

Support Protocol

Compliant with IEEE 802.3cd

Low Power Consumption

Less than 5W in temperature range of 0 to 70℃

Applications

200GBASE-SR4200G Ethernet
Data center

现在查询下载

类别

热门产品

产品详细信息

200G QSFP56 SR4 100m 850nm MPO PM4 Optical Transceiver

Functional Block Diagram

200G QSFP56 SR4

General Description

200G QSFP56 SR4 Optical Transceiver modules are designed for use in 200Gigabit Ethernet links over OM3/OM4 multimode fiber. They are compliant with the QSFP MSA and with IEEE 802.3cd 200GBASE-SR4 specification. Digital diagnostics functions are available via the I2C interface as specified by SFF-8636.The transceiver is RoHS 2.0 compliant and lead-free per Directive 2011/65/EU.

Absolute Maximum Ratings

Parameter	Symbol	Min	Max	Unit
Storage Temperature	Ts	-40	85	℃
Relative Humidity (non-condensation)	RH		85	%
Supply Voltage	Vcc	-0.5	3.6	V
Receiver Damage Threshold, per Lane	PR dmg	5		dBm

Recommended Operating Conditions

Parameter	Symbol	Min	Max	Unit
Operating Case Temperature	Top	0	70	℃
Power Supply Voltage	Vcc	3.135	3.465	V
Total Power Consumption	Pc		5	W
Bit Rate	BR		212.5	Gbps
Fiber Length on OM3 MMF			70	m
Fiber Length on OM4 MMF			100	m

Transmitter Optical Interface

Parameter	Symbol	Min	Typical	Max	Unit
Data rate per lane	DR		26.5625		Gbd
Modulation format		PAM4
Center Wavelength	λ	840	850	868	nm
RMS spectral width	σ			0.65	nm
Average Launch power, each lane	Pavg	-6.5		4	dBm
Optical Power OMA, each Lane	PoMA	-4.5		3	dBm
Launch power in OMA outer minus TDECQ		-5.9			dBm
Transmitter and dispersion eye closure (TDECQ), each lane	TDECQ			4.5	dB
Extinction ratio	ER	3			dB
Optical Return Loss Tolerance	ORLT			12	dB
Optical Power for TX DISABLE				-30	dBm
Encircled fluxb¹		≥86%at 19 um ≤30%at 4.5 um

Notes:

1.Measured into type A1a.2 or type A1a.3, or A1a.4,50 um fiber, in accordance with IEC 61280-1-4

Receiver Optical Interface

Parameter		Symbol	Min	Typical	Max	Unit
Data rate per lane		BR		26.5625		Gbd
Modulation format			PAM4
Damage threshold			5			dBm
Average receive power, each lane			-8.4		4	dBm
Receiver reflectance		Rr			-12	dB
Receiver sensitivity, each lane¹			RS=max (-6.5, SECQ-7.9)			dBm
Stressed receiver sensitivity, each ane					-3.4	dBm
Rx LOS	Assert		-30			dBm
	De-assert				-9	dBm
	Hysteresis		0.5			dB

Notes:

1.Receiver sensitivity is informative and is defined for a transmitter with a value of SECQ. Measured with conformance test signal at TP3 for BER = 2.4E-4 Pre-FEC.

High speed Electrical Specifications

Parameters	Min	Typical	Max	Unit
Supply voltage	3.135		3.465	V
Supply Current			1.59	A
Input differential impedance	90	100	110	Ω
Differential pk-pk input Voltage Tolerance	900			mVpp
Differential data output swing			900	mVpp
Bit Error Rate Pre-FEC			2.4E-4
Input Logic Level High	2		Vcc	V
Input Logic Level Low	0		0.8	V
Output Logic Level High	Vcc-0.5		Vcc	V
Output Logic Level Low	0		0.4	V

PIN Definitions

QSFP56 pin-out as being defined by QSFP MSA，PIN Descriptions are as follows:

200G QSFP56 SR4

Package dimensions

shows the package dimensions of the module. Package dimensions are specified in QSFP MSA.

200G QSFP56 SR4

Ordering Information

Part Number

Temperature Range

Distance

Fiber Type

E/O

O/E

RQ56-200G-SR4

0 to 70℃

100m

MMF

VCSEL

850nm

相关产品

200G QSFP56 FR4 2KM LC PAM4 Optical Transceiver

Features 4 duplex channels transmitters and receivers Integrated CWDM LD and PD array LC/UPC connecting interface compliant Single +3.3V power supply DDM function implemented Hot-pluggable QSFP56 form factor Transmission length up to 2km Low power dissipation:

100Gb QSFP28 ZR4 80Km 1310nm LC Optical Transceiver

100G QSFP28 ZR4 optical transceiver module, support 100Gb/s and up to 80 km transmission on SM fiber, it works in high-speed IDC connection solutions, and so on. Features 4 lanes MUX/DEMUX design Support 100GBASE-ZR4 for line rate of 103.125Gbps and OTU4 for line rate of 111.81GbpsLANWDM EML laser and PIN receiver with SOA Aggregate bandwidth of >100Gbps Duplex LC connectors Compliant withIEEE 802.3-2012 Clause 88 standard IEEE 802.3bm CAUI-4 chip to module electrical standard ITU-T G.959.1-2012-02 standard· Single +3.3V power supply operating Built-in digital diagnostic functions Temperature range 0°C to 70°C RoHS Compliant Part Support FEC(Forward Error Correction)

光线路保护（OLP）

支持单模、多模的光线路保护。支持双纤双向、单纤双向保护方式。支持1+1 (双发选收)、1:1 (选发选收)保护方式。具有较宽的光功率监测范围: -50dBm-+25dBm。具有较短的光路保护切换时间：<20ms。支持本地和远程控制。支持基于SNMP统一网管平台，网管方式CLl(telnet 及 console)、Web、NetView (图形化界面) 。

10G CWDM SFP+ Optical Transceiver

10G SFP+ optical transceiver module, support 10Gb/s and up to 100 km transmission, including: SFP+ SR, SFP+ LR, SFP+ ER, SFP+ ZR, etc. It works in high-speed IDC connection solutions, 5G network front-haul solution, network switch, PTN, OTN and so on.

1976/1660nm 光纤合束器

L50×W5×H5,0.9mm loose tube, length 1m, FC/UPC Connector

MPO转LC光分支设备

主要优势: 无损速度转换：将 MPO 分拆为 4 个独立的 LC 接口；完全透明，无需配置。面向未来：支持： 40G SR4、40G PSM4 分拆为 4×10G 100G SR4、100G PSM4 分拆为 4×25G 400G SR4 分拆为 4×100G

40G 高速铟镓砷（InGaAs）光电探测器

HSPD4040 型高速探测器模块适用于数字与模拟两种应用场景，模块内置一款铟镓砷 PIN 光电二极管（InGaAs PIN Photodiode），其响应波长范围为 1250-1650nm，并配备必要的匹配电子元件。 HSPD4040 模块的最大带宽可达 40GHz，工作电压为 +5V，兼容标准单模 9/125μm 光纤输入，射频输出端口采用 2.92mm 连接器，阻抗匹配为 50 欧姆。该模块采用密封外壳设计，重量不足 20 克，且符合《关于限制在电子电气设备中使用某些有害成分的指令》2.0 版（ROHS 2.0）标准。